Clamp Bushings Specifications
Progressive Clamp Bushings
Our patent-pending design features hardened stainless steel construction and force-multiplying technology for enhanced clamping force with multi-surface contact. Designed for use with a standard two set screw collar (90° offset), these bushings provide 25% greater holding power than standard split collars and prevent shaft marking. Available in both metric and English sizes, proper sequential clamping is required to achieve optimal results. Please refer to the detailed specifications chart for more information.
Clamp Bushings Specifications
| Part Number | OD | Length | ID |
|---|---|---|---|
| 105001 | 0.250″ | 0.221″ | 0.125″ |
| 105002 | 0.250″ | 0.221″ | 0.1563″ |
| 105003 | 0.250″ | 0.221″ | 0.1875″ |
| 105004 | 0.250″ | 0.221″ | 4 mm |
| 105005 | 0.250″ | 0.221″ | 5 mm |
| 110001 | 0.500″ | 0.449″ | 0.250″ |
| 110002 | 0.500″ | 0.449″ | 0.3125″ |
| 110003 | 0.500″ | 0.449″ | 0.375″ |
| 110004 | 0.500″ | 0.449″ | 6 mm |
| 110005 | 0.500″ | 0.449″ | 8 ,, |
| 110006 | 0.500″ | 0.449″ | 10 mm |
| 112501 | 0.625″ | 0.460″ | 0.5625″ |
| 112502 | 0.625″ | 0.460″ | 0.500″ |
| 112503 | 0.625″ | 0.460″ | 0.4375″ |
| 112504 | 0.625″ | 0.460″ | 14 mm |
| 112505 | 0.625″ | 0.460″ | 12 mm |
| 112506 | 0.625″ | 0.460″ | 10 mm |
| 115001 | 0.750″ | 0.646″ | 0.500″ |
| 115002 | 0.750″ | 0.646″ | 0.625″ |
| 115003 | 0.750″ | 0.646″ | 0.6875″ |
| 115004 | 0.750″ | 0.646″ | 12 mm |
| 115005 | 0.750″ | 0.646″ | 16 mm |
| 115006 | 0.750″ | 0.646″ | 0.375″ |
| 175001 | 0.875″ | 0.755″ | 0.750″ |
| 175002 | 0.875″ | 0.755″ | 0.6875″ |
| 175003 | 0.875″ | 0.755″ | 0.6250″ |
| 175004 | 0.875″ | 0.755″ | 18 mm |
| 175005 | 0.875″ | 0.755″ | 16 mm |
| 175006 | 0.875″ | 0.755″ | 14 mm |
| 120001 | 1.000″ | 0.773″ | 0.750″ |
| 120002 | 1.000″ | 0.773″ | 0.8125″ |
| 120003 | 1.000″ | 0.773″ | 0.875″ |
| 120004 | 1.000″ | 0.773″ | 18 mm |
| 120005 | 1.000″ | 0.773″ | 20 mm |
| 120006 | 1.000″ | 0.773″ | 0.625″ |
| 125001 | 1.250″ | 0.793″ | 1.000″ |
| 125002 | 1.250″ | 0.793″ | 1.062″ |
| 125003 | 1.250″ | 0.793″ | 1.125″ |
| 125004 | 1.250″ | 0.793″ | 24 mm |
| 125005 | 1.250″ | 0.793″ | 25 mm |
