Stainless Steel Clamp Bushings | C-Flex Bearing Co., Inc.

clamp bushings

  • Hardened Stainless Steel
  • Patent Pending Design
  • Designed for use with std. two set screw collar (90 deg. offset)
  • Will not mark shaft
  • Available in Metric or English
  • 25% greater holding power than std. split collar

The C-Flex patent pending progressive clamp bushing, utilizes force multiplying technology to generate large clamping forces with multi-surface contact.

Proper sequential clamping is required to achieve optimum results. (First, fully tighten collar set screw onto first bushing clamping surface, then tighten second collar set screw onto second bushing clamping surface.)


(click to enlarge)